Dodge Viper TT

Dodge Viper TT

Custom Twin-Turbo Systems that produce up to 1500 horsepower for Dodge Viper.

Dodge Viper Turbo Systems

Custom Turbo System with Stock Engine
800 WHP on pump gas (93 octane)
1000 WHP on race fuel (VP-C16 117 octane)
Gen 2 Viper models (1996-1999 w/forged pistons) at $35,000 installed

Custom Turbo System with Stock Engine
700 WHP on pump gas (93 octane)
800 WHP on race fuel (VP-C16 117 octane)
Gen 2 & 3 Viper models (2000-2006 w/cast pistons) at $35,000 installed

Stage 1 Turbo System with Modified Engine
900 WHP on pump gas (93 octane)
1100 WHP on race fuel (VP-C16 117 octane)
Gen 2 Viper models at $55,000 installed

Stage 2 Turbo System with Modified Engine
1000 WHP on pump gas (93 octane)
1300 WHP on race fuel (VP-C16 117 octane)
Gen 2, 3 & 4 Viper models at $75,000 installed

Stage 3 Turbo System with Highly Modified Engine
1100 WHP on pump gas (93 octane)
1500 WHP on race fuel (VP-C16 117 octane)
Gen 2, 3 & 4 Viper models starting at $95,000 installed

 

Dodge Viper Supercharger Systems

Custom Supercharger System with Stock Engine
600 WHP on pump gas (93 octane)
Gen 2 & 3 Viper models at $10,000 installed

Custom Supercharger System with Stock Engine
800 WHP on pump gas (93 octane)
900 WHP on race fuel (VP-C16 117 octane)
Gen 2 (1996-1999) Viper models at $19,500 installed

Custom Supercharger System with Modified Engine
850 WHP on pump gas (93 octane)
950 WHP on race fuel (VP-C16 117 octane)
Gen 2 & 3 Viper models starting at $35,000 installed

 

Customer Ride

Jason's Twin Turbo Dodge Viper SRT

  • Pump gas tune capable of 1000+ rwhp
  • Race gas tune capable of 1300+ rwhp

Underground Racing Custom Twin Turbo System

  • Custom twin 78mm turbochargers
  • 2 Tial billet wastegates
  • 2 Tial billet blow off valves
  • All exhaust fabrication to be stainless steel, mandrel bent, high flow and high temp heat coated
  • All air intake fabrication to be stainless steel, mandrel bent, high flow and show polished
  • High pressure t-bolt clamps for intake pressure tubes and v-band clamps for exhaust tubes
  • Electronic Boost Controller
  • Custom heat shielding
Underground Racing Custom 522 Stroker
  • Full blue print and balanced race short bock
  • Offset custom ground crankshaft
  • Custom billet rods
  • Underground Racing custom turbo camshaft
  • Custom reverse dish forged race pistons
  • Spiral locks
  • Clevite coated race main bearings
  • Clevite SBC coated race rod bearings
  • Total seal TNT file fit rings
  • Program billet main caps
  • ARP head studs

 

  

Intake and Cylinder Heads

  • Outside of intake and throttle body to be show polished
  • Stage 3 Turbo race prep cylinder heads
  • Upgraded valve springs
  • Titanium retainers
  • Pressure tested and etc.
Fuel System Upgrades
  • 1500 rwhp+ Intank fuel system with quiet option
  • Billet fuel pump hanger for three High Flow fuel pumps
  • All Aeroquip stainless steel line and aluminum fittings
  • Custom show polished fuel rails
  • Aeromotive adjustable fuel pressure regulator
  • Custom 75lb injectors
Tuning Upgrades
    • AEM EMS standalone computer
    • Custom wiring harness to make Gen 2 AEM compatible with Gen 3 Viper

    * Note: The AEM EMS is not ODB2 compatible.
  • Dyno and street ability tuning.